- 30 -
Data Deletion
The log data (memory) on the mini pump can be deleted and settings can be returned to their
defaults.
Pressing the UP key after entering the DEL screen switches the screen cyclically as follows: log data
deletion
→
return to defaults
→
DEL screen. Pressing the DOWN key switches the screen in the
reverse direction.
Pressing the MODE key in any of the screens changes the screen to the power ON time.
DATA indicates that all registered log data are to be deleted.
DFLT indicates that all pump settings are to be returned to their
defaults.
In each of the relevant screens, hold down the MODE key to scroll
"PUSH START KEY". In this screen, pressing the MODE key cancels the operation.
Press the START/STOP key to execute the operation.
When "END" is displayed, this indicates that deletion is completed.
* Note that logs or settings cannot be restored once they have been
deleted.
* When settings have been returned to their defaults, the flow volume
calibration value (see page 32 "Calibration") is also returned to its
default.
* Do not turn OFF the pump while data is being deleted. Doing so might cause malfunction.
Note that, should some nonconformity occur, SIBATA does not assume any liability
whatsoever for compensation of data or content that could not be acquired or logged as a
result, loss of data or other content, and other direct and indirect damages relating to the
preceding. We recommend using communications software (sold separately) to periodically
back up data as a precaution against malfunction or accidents. We also recommend
preliminary operation checks and other periodic inspection.
Power ON Time
The time elapsed since the mini pump was turned ON is displayed.
Only the MODE key is functional in this screen.
Log data deletion
Return to defaults
Содержание 090860-0341
Страница 43: ......
