Sibata 090860-0341, Руководство по эксплуатации

Страница: 22 / 44

- 20 -
Volume Timer Mode
Press the MODE key until the VT segment of the mode display bar lights.
The instantaneous flow rate setting is displayed initially in this screen.
Pressing the UP key switches the screen cyclically as follows: sampling start time → volume timer →
flow rate setting. Pressing the DOWN key switches the screen in the reverse direction.
The integrated flow volume and other setup items are sometimes displayed by using the UP/DOWN
key. (See page 26 "After Ending Operation.")
Pressing the MODE key in any of the screens changes the mode to the cycle timer mode.
Hold down the MODE key at any of the flow rate setting, sampling start
time or volume timer setup items. The SET segment of the mode display
bar lights, and the display value flashes to indicate that the value can be
set.
Change the numeric value by pressing the UP/DOWN key to set the flow volume.
Each press of the MODE key in the setup screen switches the screen cyclically as follows: flow rate
setting
→ sampling start time (hours) → sampling start time (minutes) → volume timer → flow rate
setting.
After entering each of the settings, press the START/STOP key. The display value lights, and the
SET segment of the mode display bar goes out to indicate that setup is complete.
In the volume timer mode, only three items are set: flow rate, sampling start time, and end
integrated flow volume (volume timer).
Flow rate setting
End integrated flow
volume (volume timer)
Sampling start time
Flow rate setting Sampling start time (hours)
Down timer setting Sampling start time (minutes)
LED display
conventions
Flashing
Lit