Shure Incorporated
60/75
•
•
1.
2.
3.
Network:
Save the current reference network to enable network mapping and topology reports. This option is available
when all units are registered and the network is fully analyzed.
Indication:
Click
Indication in all devices
to activate the LEDs in all connected units, to visually check that all units are con-
nected and working. Click
Indication in selected DCS-LAN connection
to view the units in a specific chain or loop, and
identify the first and last units in the sequence.
The system diagnostic is available for MXC systems only. If any legacy DCS hardware is connected, the system diagnostic is
disabled.
Report
Go to
Diagnostics
>
Report
.
Click either the
Network topology
or
System diagnostic
button to generate the selected report.
Note:
To generate a network topology report, you must first save the reference network under
Diagnostics
>
System
diagnostic
.
Save the resulting file and send it to the Shure support group for analysis.