Shure Incorporated
50/75
Four languages are provided with the FL6000 mode license, and can be expanded to 8, 16, or 31 with an additional license.
Interpretation Setup
Multi-language interpretation can be set up through the CCU web interface in standalone systems, or in SW6000. If more than
4 languages are needed, purchase and install an additional feature license before setting up interpretation.
Interpretation Channels
Assign the number of interpretation channels needed (0 to 31) at
Interpretation
>
Interpretation
channels
.
Note:
When 0 is selected, only Floor audio (Channel 0) is available.
The
Channel display
setting determines whether the channel selectors on participant conference units display channel number
or language abbreviation.
Language Setup
The
Language setup
list shows the channels defined in the
Interpreter channels
settings. Assign a language from the drop-
down menu for each language.
Booth Channel Setup
To simplify managing multiple languages, interpreter consoles are grouped into Booths.
By default, Booth 1 is assigned to Channel 1, Booth 2 to Channel 2 etc., but languages can be manually assigned to booths at
Interpretation
>
Booth
channel
setup
. Multiple booths can be assigned to the same interpretation channel.
Interpretation Settings
Mic Interrupt Modes
The
Interpretation
>
Mic
interrupt
modes
setting applies when there are multiple in-
terpreters on the same language. By default, interpreters alternate with each other and can-
not override a unit already in use.
