SHOWTEC Performer Profile 600, Инструкция по эксплуатации

Страница: 25 / 32

24
Ordercode: 33060
Performer Profile 600
4. Run Mode
In this mode you can set the device as a master or slave fixture.
01)
While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP and DOWN buttons to toggle between the 2 options:
Master Mode
Slave mode
04)
If the display shows , the Performer will become a master device and will utilize the DMX
protocol to determine its performance.
05) If the display shows , the Performer will become a slave device and will react the same as the
master device.
DMX Channels
1 Channel
Channel 1 – Dimmer
0-255 0-100% dimmer
2 Channels
Channel 1 – Dimmer
0-255 0-100% dimmer
Channel 2 – Fine dimmer
0-255 Fine dimmer adjustment
3 Channels
Channel 1 – Dimmer
0-255 0-100% dimmer
Channel 2 – Fine dimmer
0-255 Fine dimmer adjustment
Channel 3 – Strobe
0-9 Strobe OFF
10-99 Strobe ON, from slow to fast
100-109 Strobe OFF
110-179 Pulse strobe ON, from slow to fast
180-189 Strobe OFF
190-255 Random strobe, from slow to fast