SHOWTEC Performer Profile 600, Инструкция по эксплуатации

Страница: 14 / 32

13
Ordercode: 33060
Performer Profile 600
Shutters
The shutters are located inside the barrel. Move them back and forth to modify the shape of the beam.
Fig. 07
Drop-in Iris-Slot
The Drop-in Iris slot is located on the top of the barrel. It accommodates either a drop-in iris or a
motorized pattern device. When the slot is not in use, a small sheet metal cover secured with 2 screws
prevents light leakage (Fig. 08).
01)
Use a screwdriver to loosen the screws on the drop-in iris slot cover. Do not remove the screws.
02) Slide the cover completely forward to expose the slot.
03) Insert the iris or motorized pattern device. For an iris, install the flat side towards the shutters and make
sure that the iris handle extends from the slot.
04) Slide the slot cover back towards the shutters, until it meets the iris handle. Leave enough space to
move the iris handle.
05) Secure the drop-in iris slot cover by tightening the screws.
Fig. 08