35
(2) Manual printing stopping procedure
1) Press the “PRINT” key.
2) Use the “PRINT” key to display “
” , and press the “ENT” key.
3) Use the “PRINT” key to select “
” . Pressing the “ENT” key stops manual printing.
However, for the line during printing, printing will continue until the line is completely printed. Then
manual printing will stop, and the display will return to the status prior to starting manual printing.
Fig. 6.4.1 Manual Printing
6.4.2 List Printing
Prints the following setting data of the instrument on the chart paper:
Date/time/Chart feed speed/2nd chart feed speed/Printing cycle
Channel number/range/scaling value/engineering unit
Setting alarm type
(1) List printing operating procedure
1) Press the “PRINT” key.
2) Use the “PRINT” key to display “
”, and press the “ENT” key.
3) Use the “PRINT” key to select “
”. Pressing the “ENT” key executes the list printing.
Once list printing starts, the display automatically returns to the Data Display screen.
Upon termination of the list printing, the display returns to the status prior to starting list printing.
[Note]
(1) Analog recording is interrupted while list printing is running. However, measurement/alarm
detection remains effective.
(2) If an alarm is activated while list printing is running, alarm printing starts when recording
restarts.
Nov.12.99.11:08
1:
11.25 mV
2:
0.45 mV
3:
0.07 mV
4:
–0.00 mV
5:
–1.12 mV
6:
–0.39 mV
