Shindaiwa Limited
POWERCENTER 15
Four Ashes, Wolverhampton, UK
PC15-OM-Vs: 1
T: +44 (0)1902 791855
(2) Changing the Oil Filter
1st time
50 hours
2nd time
and after
Every 200 hours
1)
Drain the engine oil according to the
procedures of " (1) Changing the Engine
Oil".
2)
Remove the oil filter using a filter
wrench.
3)
Apply a thin layer of oil to the gasket of a new oil
filter.
4)
Screw in the oil filter by hand and securely tighten
by hand (do not use a filter wrench) after the gasket contacts the seal surface.
5)
Add engine oil.
<Note>
Contact the retail outlet where the equipment was purchased if you do not have a filter
wrench.
Oil filter part no.: 15853-32436 (Kubota part no.)
After adding engine oil, operate the engine for a short period and check that there is no
oil leakage. Stop the engine when completed.
(3) Cleaning/Replacing the Air Element
Cleaning
1st time: 50 hours
2nd time and after: Every 100 hours
Replacement
Every 400 hours
1)
Release the air cleaner clips and remove the
cleaner cap.
2)
Clean or replace the air element.
＜
If dry dust is adhering
＞
Spray compressed air from within the
element.
＜
If carbon or oily substance is adhering
＞
Replace with a new part.
3)
Install in the reverse order of removal.
<Note>
Clean sooner than scheduled if using the
equipment in a dusty location.
Element part no.: 1G319-11211(Kubota part no.)
Oil Filter
Gasket
Clip
Clip
Air Cleaner
Element
Air Cleaner Cap
Clip
-37-
