Shindaiwa Limited
POWERCENTER 15
Four Ashes, Wolverhampton, UK
PC15-OM-Vs: 1
T: +44 (0)1902 791855
Warning: Electric Shock/Injuries
Do not touch the equipment during operation if the equipment or your body is wet.
Always be sure to stop the engine and remove the starter key before performing
any equipment check or maintenance.
Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
Do not modify the equipment and do not operate with parts removed.
Warning: Fire
Always be sure to stop the engine when inspecting fuel or refuelling, and absolutely
never perform such tasks near fire or other open flame. Wait until the engine has
completely cooled before inspecting fuel or refuelling.
Always be sure to wipe up any spilled fuel or oil.
Spilled fuel and oil accumulates in the spill containment. Do not operate the
equipment with liquid accumulated in the spill containment.
Absolutely never use the equipment if there is a fuel, oil or cooling water leak, and
be sure to always repair the leak before using.
Absolutely never inspect or perform maintenance to the equipment near fire or
other open flame.
Warning: Injuries to Eyes and Skin
Use protective gear, such as rubber gloves, when inspecting or replacing the
battery due to the dilute sulphuric acid in the battery fluid. Be sure that fluid does
not get into eyes, or on skin or clothing.
If battery fluid gets into the eyes, or on the skin or clothing, immediately wash with a
large amount of water, and always be especially sure to seek medical attention if it
gets into the eyes.
Warning: Explosion
Do not operate the equipment or recharge the battery when the battery fluid level is
below the lower level.
Do not generate any sparks near the battery and do not allow any fire or other open
flame near the equipment because the battery generates ignitable gas.
Caution: Burns
The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.
Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.
9. Inspection/Maintenance
８．
-34-
