- 15 -
(1) Zero/Span Automatic Adjustment
(1-0 Automatic adjustment screen
[Initial value], Zero side automatic adjustment screen
Span side automatic
adjustment screen
)
1) Press the
key on the 1-0 automatic adjustment screen for 3 seconds to proceed to the 1-0-1 zero/span automatic
adjustment screen.
2) The screen will flash during the automatic adjustment.
3) During span side automatic adjustment, it is possible to interrupt automatic adjustment and return to the 1-0 automatic
adjustment screen by using
key.
4) Upon completion of automatic adjustment, the display automatically changes to the 0-0 basic screen.
DISP
DISP
ENT
1-0 Automatic adjustment
screen
key for
3 seconds
Zero side automatic
adjustment screen
Automatic
Span side automatic
adjustment screen
To the 0-0 basic screen
(1-1 Event 1 screen (option), or the 1-10 screen which are described from the next page)
(2) Zero/Span Manual Adjustment
(1-00 manual adjustment screen
, 1-00-1 zeroside manual adjustment screen
, 1-00-2 span side manual adjustment
screen
)
1) Pressing the
key for 3 seconds on the 1-00 manual adjustment screen calls the 1-00-1 zero side manual adjustment screen,
which blinks while adjustment is going on.
2) Set the motor to the zero position (usually full close) by the use of
and
keys. When the
key is pressed for
registration, the display changes to the 1-00-2 span side manual adjustment screen, which blinks.
3) Set the motor to the span position (usually full open) by the use of the
and
keys. When the
key is pressed for
registration, the display changes to the 1-00 manual adjustment screen.
4) Pressing the
key during the zero side adjustment calls the span side adjustment screen and vice versa.
5) Pressing the
key during zero/span manual adjustment interrupts the manual adjustment and the display returns to the 1-00
manual adjustment screen.
6) In adjustment, the zero adjustment is on the closing side and the span adjustment is on the opening side.
7) Make sure to adjust so that span side data is larger than zero side data. When span side data is adjusted to be less than the zero
side data, it is taken as an error and an error message appears on the display.
DISP
DISP
ENT
ENT
ENT
key for
3 seconds
(1-1 Event 1 screen (option), or the 1-10 screen which are described from the next page)
1-00 manual adjustment
screen
1-00-1 zero side manual
adjustment
1-00-2 span side manual
adjustment
Register by
key
To 1-00 manual adjustment screen
upon registration by key.
