30
Figure 4
‑
22 Position description setup
When "Pinyin input method" is prompted at the left bottom corner of the figure, it means
"Pinyin input method" is in use currently and Chinese characters can be input by this. 10
Chinese characters or 20 English characters can be input into "position description" column for
each detector/module, as their display information at the time of alarm output.
After "detector/module setup" is completed, press "OK" button to save the setup and exit, or
press "Cancel" button to retain the original setup and exit.
As the contents required to be set in the detector/module setup window are plenty, the
function of batch setting is incorporated to improve efficiency and quicken information setting.
The batch setting of detector/module is divided into batch setting row and batch setting
column.
1. Batch setting row
Batch setting row refers to use of a selected row as the template and batch setting of
equipment with consecutive address number, that is, the equipment at multiple consecutive
addresses share the same equipment type, as follows:
Figure 4-23 Batch setting row of detector/module
First, set the address end number required for batch setting on the template window; the
start address is provided with the number of the address of the selected row (address 1 in this
example); only zone number, building number, floor number and room number can be changed
and set in the template window, equipment type and other property items shall keep the same
as those of address 1; if zone number, building number, floor number and room number are not
checked (boxes before them are not ticked), it means the original setting is not changed; if zone
number is checked (box before it is ticked), it means the zone number is the same as that of
address 1;if building number is checked (box before it is ticked), it means the building number is
the same as that of address 1; if floor number and room number are checked (boxes before
