13
Login operation
Under not-logged-in state, press C
TRL
、
A
LT
+D
EL
on USB keyboard simultaneously, or press
"*" key at the left bottom corner of the panel, and pop up the password input window (as
shown below). Press E
NTER
key on USB keyboard or "OK" key on the panel keyboard after
entering the password.
Figure 3
‑
11 Password logging window
In order to keep confidential, "
＊
" will be displayed in the input
box when entering any key value. After login-in, panel keyboard will be opened at the
same time and
KEYBOARD
indicator light on the panel will be lightened.
Log out
Under logging state, press C
TRL
, A
LT
+D
EL
keys on USB keyboard simultaneously, or press
"*" keys at the left bottom corner of the panel,and pop up the inquiry window. Select E
NTER
.
The system logs out.
Figure 3
‑
12 Inquiry window of log out
3.2.3.2
The watchman logins in via panel keyboard
The watchman can login in directly via panel of the control unit and it is only required to
operate the panel.
Login operation
Under not-logged-in state, press KEYBOARD on the panel, pop up the password input
window and enter into the password according to the numeric keys on the panel keyboard.
Press ENTER to confirm after inputting the password and KEYBOARD indicator light is lit at
the same time.
Figure 3
‑
13 Watchman login interface
Log out
Under logging state, press KEYBOARD key on the panel, and the system will exit the logging
status and KEYBOARD light goes off.
Under logging state, the system will log out automatically if it
is inactive within 3 minutes (no key is pressed and the mouse does not move).
