shelolab SM10HP-2, Инструкция по установке и эксплуатации

Страница: 11 / 44

11 | P a g e
RECEIVING YOUR OVEN (CONTINUED)
R
ECORDING
D
ATA
P
LATE
I
NFORMATION
Locate the data plate on the back of the oven next to the power inlet. The data plate contains the
oven model number and serial number. Enter this information below for future reference.
Date Plate Information
Model Number
Serial Number
T
EMPERATURE
R
EFERENCE
S
ENSOR
D
EVICE
The oven does not come with a temperature reference device. A reference sensor device must be
purchased separately for performing accuracy verifications or calibrations of the oven temperature
display.
The reference device must be accurate to at least 0.1°C, and should be regularly calibrated,
preferably by a third party.
For best results, use a digital device with a thermocouple or other remote reading probe. Remote
readings avoid oven chamber door openings during verification and calibration procedures. This
avoids subsequent waits for the chamber temperature to re-stabilize. Select a probe suitable for the
application temperature you will be calibrating or verifying the display accuracy at.
Alcohol thermometers are insufficient for conducting accurate verifications and calibrations. Do not use a
mercury thermometer.
Never place a mercury thermometer in the oven chamber.