manualshive.com logo in svg

Sharp MX-M550N, Руководство по обслуживанию, Страница: 341 / 412

Поделиться
Скачать
Sharp MX-M550N Скачать руководство пользователя страница 341

MX-M700N  PHOTOCONDUCTOR SECTION  J – 3

2. Operational descriptions

A. Outline

In this section, laser beams are radiated to the OPC drum surface
which was negatively charged, making electrostatic latent images.

B. Description

The OPC drum surface is negatively charged by the main charger.
The laser beam images are radiated to the OPC drum surface by
the laser unit to form latent electrostatic images.

1)

The OPC drum surface is negatively charged by the main
charger.

The main charger grid is provided with the screen grid. The
OPC drum is charged at a voltage virtually same as the volt-
age applied to the screen grid.

2)

LED lights are radiated to the OPC drum surface by the laser
unit to form latent electrostatic images.

When laser lights are radiated to the OPC drum CGL, negative
and positive charges are generated.

Positive charges generated in CGL are attracted to the nega-
tive charges on the OPC drum surface. On the other hand,
negative charges are attracted to the positive charges in the
OPC drum aluminum layer.

Therefore, positive charges and negative charges are bal-
anced out on the OPC drum and in the aluminum layer, reduc-
ing positive and negative charges to decrease the OPC drum
surface voltage.

Electric charges remain at a position where LED lights are not
radiated.

As a result, latent electrostatic images are formed on the OPC
drum surface.

3)

After transfer operation, remaining toner is removed by the
cleaning blade.

Toner removed from the OPC drum surface is transported to
the waste toner section in the toner cartridge by the waste
toner transport screw.

4)

The whole surface of the OPC drum is discharged.

By radiating the discharge lamp light to the discharge lens,
light is radiated through the lens to the OPC drum surface.

When the discharge lamp light is radiated to the OPC drum
CGL, positive and negative charges are generated.

Positive charges generated in CGL are attracted to the nega-
tive charges on the OPC drum surface. On the other hand,
negative charges are attracted to the positive charges in the
aluminum layer of the OPC drum.

Therefore, positive and negative charges are balanced out on
the OPC drum surface and in the aluminum layer, reducing
positive and negative charged to decrease the surface voltage
of the OPC drum.

C. Main charger

The OPC drum surface is negatively charged in this section.

Aluminum

layer

OPC drum

CTL

CGL

High voltage unit

Main corona unit

Screen grid

OPC drum

LED lights

Aluminum

layer

OPC drum

CGL

CTL

Drum

Lamp

CLT

CGL

Auminum

layer

Auminum

layer

CLT

CGL

Drum

Содержание MX-M550N





























































































































































































































































































































































































































Отзывы:

Нет отзывов