manualshive.com logo in svg

Sharp MX-3050N, Руководство пользователя, Страница: 742 / 906

Поделиться
Скачать
Sharp MX-3050N Скачать руководство пользователя страница 742

7-47

SYSTEM SETTINGS

►

STATUS

Network Status

The Network Status screen shows the general status information and the statuses relevant to, TCP/IP, DNS, and WINS 
protocols. 

Firmware Version

Shows the firmware version of the machine as a list.

Item

Description

General

Displays the information common to the network. 

•

Connection Type

: 

Displays the network connection type.

•

Link Status

: 

Displays the data transfer rate of the NIC and cable 
information.

•

Duplex Mode

: 

Displays the duplex mode of the NIC.

•

Hardware Address

: 

Displays the MAC address of the NIC.

•

Device Name

: 

Displays the device name.

•

Domain Name

: 

Displays the domain name.

•

Reception Level (Max. 100)

:

Displays the reception level of the wireless LAN. 
(When connected to a wireless network)

TCP/IP

Displays the current status of the TCP/IP protocol.

•

TCP/IP

: 

Shows use of TCP/IP.

•

IPv4 Settings

: 

Displays the IPv4 protocol settings. 

•

DHCP

: Selects whether or not the IP address is obtained from the DHCP server.

•

IPv4 Address

: Displays the IPv4 address to which the notification is sent.

•

Subnet Mask

: Displays the current subnet mask.

•

Default Gateway

: Displays the current default gateway.

•

IPv6 Settings

: 

Displays the IPv6 status. 

•

IPv6

: Displays whether IPv6 is enabled.

•

DHCPv6

: Displays the status of the DHCPv6 server.

•

Manual Address

: Displays the IPv6 address that has been manually specified.

•

Default Gateway

: Displays the current default gateway.

•

Link-Local Address

: Displays the link-local address.

•

Stateless Address 1

: Displays the stateless address.

•

Stateless Address 2

: Displays the stateless address.

•

Stateful Address

: Displays the stateful address.

DNS

Displays the status of the DNS server. 

•

IPv4 Settings

: 

•

Primary Server

: Displays the current IP address of the primary DNS server.

•

Secondary Server

: Displays the current IP address of the secondary DNS server.

•

IPv6 Settings

: 

•

Primary Server

: Displays the current IP address of the primary DNS server.

•

Secondary Server

: Displays the current IP address of the secondary DNS server.

•

Domain Name

: Displays the current domain name of the DNS server.

WINS

Displays the status of the WINS server. 

•

Primary Server

: 

Displays the current IP address of the primary WINS 
server.

•

Secondary Server

: 

Displays the current IP address of the secondary WINS 
server.

•

Primary Server (DHCP)

: 

Displays the current IP address of the primary WINS 
server (DHCP).

•

Secondary Server (DHCP)

: 

Displays the current IP address of the secondary WINS 
server (DHCP).

•

Scope ID

: 

Displays the current WINS scope ID.

•

Scope ID (DHCP)

: 

Displays the current WINS scope ID (DHCP).

Содержание MX-3050N











































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов