Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 93 / 186

4-9
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
staple sorter (AR-SS2) and the finisher (AR-FN4). For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
Photoconductive drum
AR-C330 has advanced process control technology which improves
copy quality uniformity. This feature stabilizes copy quality throughout
the life of the photoconductive drum by automatically compensating
for the changes in drum characteristics due to wear, operator use
patterns, and environmental conditions. The automatic adjustments
are made in response to a sensor that detects the reflectance
characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1
Store the supplies in a location that is:
● clean and dry,
● at a stable temperature,
●
not exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
●
Paper stored in packages standing up or out of the wrapper
may curl or become damp, resulting in paper misfeeds.
3
Store a new toner cartridge box horizontally. Do not
store it standing on end. If stored standing on end, the
toner may not distribute well even after shaking the
cartridge vigorously, and will remain inside the cartridge
without flowing out.
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary
use of the product - whereas those parts which normally exceed the life of the product are not to be considered
as spare parts. Consumables too, are available for 7 years following the termination of production.