Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 67 / 186

3-23
CHAPTER
3
SPECIAL FUNCTIONS
Colour adjustments
COLOUR ADJUSTMENTS
●
The setting screen for COLOUR BALANCE will appear.
5
Use the keys indicated in the illustration above to adjust
the colour balance settings.
Use these keys to select the colour to be adjusted (
C
= cyan,
M
= magenta,
Y
= yellow,
Bk
= black).
If only the area around the letter inside a key is highlighted, the
settings have been changed from the factory default settings.
Use these keys to adjust the densities of each of the eight
density levels.
When one of the keys is pressed, the corresponding indicator
line will move up or down one step. Press the
key to
increase the density of the corresponding level, or the key
to decrease the density.
Use these keys to change the densities of all eight levels at
once.
When either key is pressed, the indicator lines of all eight levels
will move up or down one step.
Press the
key to increase the density, or the key to
decrease the density.
Use this key to return the densities of all eight levels to the
initial settings.
The initial colour balance settings are the values set with key
operator program “Initial Colour Balance Setting”. For this
reason, the initial settings may not necessarily be 0 (the middle
indicator position) for all levels. The initial setting of each level
is shown by a gray indicator. See page 8-13.
6
Make all other desired copier selections and enter the
desired number of copies.
7
Press the COLOUR COPY START ( ) key.
●
The BLACK COPY START ( ) key can be pressed for
copying. However, the COLOUR BALANCE settings will be
ignored.
●
You can also store colour balance settings for repeated use in
the future. (Refer to “Storing a Job Program” on page 2-18). In
this case, complete the colour balance setting before pressing
the PROGRAM key because colour copy samples cannot be
made after the PROGRAM key is pressed.
READY TO COPY.
SPECIAL MODES
COLOUR BALANCE CANCEL OK
OK
M
C
Y
Bk
READY TO COPY
COLOUR BALANCE
M
C
CANCEL OK
OK