Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 12 / 186

10
2
1
2
1
[Inch series]
[AB series]
1. A4
2. A3
3. B4
DUPLEX
DUPLEX
1.8/ 11
2.11 17
3.8/ 14
Depending on the country or area, some keys of this copier will be indicated with
either an English name or a symbol. –– Example: INFORMATION (
) key,
PROGRAM ( ) key.
INTRODUCTION
AR-C330 is a digital colour image processing machine which provides high productivity at a colour copy speed of 33
copies/minute and convenient features including intelligent image-editing functions.
Among its many useful features and functions are the document feeder (optional), photo copying, internal auditor,
and various special functions such as automatic duplex copying, dual page copying, margin shift, erase, XY zoom,
and NEG./POS. reverse functions. This machine can be equipped with an optional large capacity tray which holds
3,500 sheets of copy paper. The machine can also be equipped with an optional staple sorter or an optional finisher
to provide finished copy sets ready for distribution. In addition, the machine can be equipped with an optional Fiery
print controller to allow this machine to be used as a colour printer and a colour image scanner.
This machine was also designed with ease of use in mind. The easy-to-understand operation panel with touch panel
system and INFORMATION function will guide the user through most operations. To gain the maximum benefit of
all the features of the machine, however, it is recommended that users first read this manual to become familiar with
all the features.
NOTES:
● This manual describes only copier features. For a description of optional printer features, see the separate relevant
manual. A brief description of operation in the PRINT mode is, however, written on pages 1-10 to 1-12.
●
This machine can be equipped with an optional document cover or reversing automatic document feeder (RADF).
The illustrations in this manual are mainly for the machine with an optional RADF installed.
● The exit tray is also optional. The illustrations in this manual are, however, mainly for the machine with the exit tray
installed. (In some regions, the exit tray is provided as a standard component.)
●
The display on the touch panel varies with installation of optional equipment. The illustrations of the touch panel
in this manual are mainly for the machine with an optional RADF installed.
USING THIS MANUAL
This manual is intended as an operation guide for both general users and key operators.
For General Users
It is recommended that you read the GETTING STARTED, MAKING COPIES, and SPECIAL FUNCTIONS sections
to become familiar with the available features and functions of your copier. Then refer to the manual as needed to
become thoroughly familiar with those features you will normally use.
For Key Operators
Please read all sections thoroughly to become familiar with all features and functions of your copier. Throughout the
manual, information which is relevant to key operator functions is noted by “
★
KEY OPERATOR ”. Please pay close
attention to these notes and to the SUPPLIES, COPIER TROUBLE?, GENERAL INFORMATION, and OPTIONAL
EQUIPMENT sections so you can ensure smooth and efficient operation of your machine.
The KEY OPERATOR’S GUIDE section has been written especially for you. It contains the programs and
programming information that will enable you to tailor functions for maximum benefit to your company.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
●
The inch series specifications are quoted in brackets.
For example:
Page 2-6 ------------------------------------------ B4 to A3 ( 8-1/2" x 14" to 11" x 17")
Page 2-12, step 3, Menu 1-A ---------------- 86%, 81%, and 70% (77% and 64%)
● Although AB series size indications are shown on the touch panel of this manual, inch
series indications are displayed on the inch series machines.
● In some regions, the spellings in this manual may be different from the touch panel
display. (colour, centring, etc.)