Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 154 / 186

8-8
CHAPTER
8
5
Select the desired category on the touch panel.
Example:
To select the timer settings category, press the “TIMER
SETTINGS” key.
●
If you have selected “PRINTER” or “ACCOUNT CONTROL” in
step 4, this step is not needed.
6
Press the key of the desired program on the touch panel.
Example:
To see the auto clear setting, press the “AUTO CLEAR
SETTING” key.
●
For some programs, a check box is displayed to the left of the
program name. If the box is pressed, a check mark will appear and
the program will be set. If the box is pressed again, the check mark
will disappear and the program will be cancelled.
●
For other programs, the program setting screen of the program
will appear when the program key is pressed.
● If and/or keys are displayed, additional programs can be
displayed using these keys.
7
Follow instructions for the program.
●
If a mistake is made during entry, press the CLEAR ( ) key to
clear the entry.
● To continue with other key operator programs, press the “OK” key
and then select another program.
8
To exit the key operator program mode, press the CLEAR
ALL (
CA
) key.
KEY OPERATOR PROGRAMS
TIMER SETTINGS
SLEEP MODE SETTING
AUTO CLEAR SETTING
PREHEAT MODE SETTINGS
MESSAGE TIME SETTING
60min
60sec
15min
6sec
OK
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
ENABLE/DISABLE
SETTINGS
TIMER SETTINGS
REGISTRATION
ADJUSTMENT
AUTO COLOUR CALIBRATION
OK
KEY OPERATOR PROGRAMS
KEY OPERATOR
’S GUIDE
Key operator programs