Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 38 / 186

2-14
CHAPTER
2
1
Place the original on the document glass or in the
optional document feeder tray.
2
Open the bypass tray.
3
Set the bypass tray guides to the width of the copy
paper.
●
Be sure to extend the tray when feeding paper larger than
A4 (8-1/2" x 11") size.
● If the bypass tray guides are set wider than the copy paper, the
inside of the machine may become soiled, resulting in smudges
on succeeding copies.
4
Insert the copy paper all the way into the bypass tray.
● Special purpose papers other than SHARP recommended
transparency film must be fed individually. Multiple sheets of
SHARP recommended transparency film can be loaded in the
bypass tray.
● Up to 100 sheets of standard copy paper measuring from A6 to
A3W (5-1/2" x 8-1/2" to 12" x 18") can be loaded into the bypass
tray.
●
For automatic two-sided copying of A5 paper, set the long edge
of the paper to be fed into the machine.
●
A6 size paper must be fed narrow side into the feed slot and must
be fed individually.
●
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
5
Press the “PAPER SELECT” key on the touch panel and
then select the desired paper type in the bypass tray
section.
●
“60~105 g /m 2 ” (“16 ~ 28 lbs.”) (“PLAIN PAPER”), “106~130 g /m 2 ”
(
“28+ ~ 35 lbs.” ) (“HEAVY PAPER 1”), “131~280 g /m
2
”
(
“35+ ~ 75
lbs.” ) (“HEAVY PAPER 2”) , “TRANSPARENCY SPEED MODE”
or “TRANSPARENCY QUALITY MODE” can be set.
6
Set the number of copies.
7
Press the COLOUR COPY START ( ) key or BLACK
COPY START ( ) key.
MAKING COPIES
Special papers (manual feed)
SPECIAL PAPERS (manual feed)
The bypass tray is used to copy onto transparency film and other
special purpose papers. Up to 100 sheets of standard copy paper
can be set in the bypass tray.
●
When copying onto transparency film, the maximum image loss on
the copies will be 10 mm (13/32") along the leading and trailing
edges and 6 mm (1/4") in total along the other edges.
Transparency film must be fed long edge into the feed slot.
● Automatic duplex copying will not work when a non-standard sized
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the bypass tray, the
corresponding one-sided mode will be selected automatically
when a START (
, ) key is pressed.
READY TO COPY.
AUTO
EXPOSURE PAPER SELECT
10
COPY
PAPER TYPE
1.
2.
3.
A4
A3
B4
A4
60~105
g
/m 2
106~130
g
/m
2
131~28
TRANSPARENCY
SPEED MODE
TRANSP
QUALIT