Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 181 / 186

8-35
CHAPTER
8
OTHER PROGRAMS
The following two key operator programs are common programs that
are not included among the three groups: copier key operator programs,
printer key operator programs, and account control. The programs can
be selected by pressing the relevant key on the touch panel after the
key operator program mode is selected.
Total Count
This program is used to display the total counts, including counts of the copier,
document feeder, duplex module, and stapler.
An A3 (11" x 17") or an A3W (12" x 18") copy is counted as two copies.
A two-sided copy is counted as two copies (four copies for A3 (11" x 17")).
Covers and transparency inserts are counted as one copy even if they are
blank except in some areas.
The lists printed with the key operator programs are included in “SELF
PRINTS”.
When the “TOTAL COUNT” key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS
TOTAL COUNT
COPIES : 600,000 SELF PRINTS
(COLOUR) (COLOUR)
: 500,000
COPIES : 500,000 SELF PRINTS
(B/W) (B/W)
: 500,000
DUPLEX : 500,000
DOCUMENT
FEEDER
: 600,000
PRINT
STAPLER : 500,000
OK
(COLOUR)
(B/W)
PRINTS : 500,000
PRINTS : 800,000
SCANNER
MODE
: 800,000
The total counts for all units in use will be displayed.
To print these counts, press the “PRINT” key.
Press the “OK” key to exit the program.
Program List Printout
This program is used to print out the list of available key operator
programs.
When the “PROGRAM LIST PRINTOUT” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
PROGRAM LIST PRINTOUT
SELECT MODE.
ALL PROGRAMS
COPIER PRINTER
ACCOUNT
CONTROL
OK
Press the “COPIER” key.
●
The copier will start printing. To stop printing after starting, press
the “CANCEL” key.
● The “PRINTER” and “ALL PROGRAMS” keys are used when an
optional printer feature is installed.
KEY OPERATOR’S GUIDE
Key operator programs
KEY OPERATOR PROGRAMS