Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 159 / 186

8-13
CHAPTER
8
Initial Colour Balance Setting
Colour balance settings that have been adjusted using the special
function of “Colour Balance” explained on page 3-22 can be called up
and set as initial colour balance settings* by storing them ahead of time
in a job program (page 2-18). Use this feature when you want to
repeatedly use settings for a favorite colour or for correction when a
change occurs in the colour balance.
* Preset values displayed when you select the special function of
“Colour Balance”. The factory default settings are the “0” position for
all eight levels of each colour.
When the “INITIAL COLOUR BALANCE SETTING” key is pressed,
the following display will appear.
KEY OPERATOR PROGRAMS
INITIAL COLOUR BALANCE SETTING
PRESS PROGRAM NUMBER IN WHICH COLOUR BALANCE
PROGRAM IS REGISTERED.
OK
RETURN TO THE FACTORY DEFAULT
SETTING.
1 2 3
4 5 6
7 8 9
1. Press the job program number key in which the colour
balance settings have been stored.
● If a job program number key is pressed that does not have colour
balance settings, a warning message will appear.
●
To return colour balance settings that have been stored as initial
settings to the factory default settings (the “0” position for all eight
levels of each colour), press the “RETURN TO THE FACTORY
DEFAULT SETTINGS” key.
2. Press the “OK” key.
● The colour balance settings stored in the job program number
key that was pressed are set as the initial settings.
Size Setting for [EXTRA]
This program allows the paper size to be set for each paper tray. The
setting through this program will only be effective when the paper size
indicator of the paper tray is set to [EXTRA].
When the “SIZE SETTING FOR [EXTRA]” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
SIZE SETTING FOR [EXTRA]
INCH
PAPER TRAY
OK
A3 B4 A4 A4R
1 2 3
B5 B5R A5
EXTRA
SIZE INPUT AB
KEY OPERATOR PROGRAMS
KEY OPERATOR
’S GUIDE
Key operator programs