Sharp AR-C330 Key operators, Руководство по эксплуатации

Страница: 84 / 186

3-40
CHAPTER
3
IMAGE EDITING FUNCTIONS
SPECIAL FUNCTIONS
Image editing functions
7
If non-standard size paper has been set in the bypass
tray, adjust the paper size using the
and keys. If
standard size paper has been set in the bypass tray,
check the “ENABLE AUTO SIZE DETECTION” check
box.
●
Adjust each X (horizontal) and Y (vertical) dimension using the
and keys.
●
If the “ENABLE AUTO SIZE DETECTION” check box is checked
on either tab, the size detection function will be activated. In this
case, the “X/Y” keys and “
/ ” keys will be grayed out not
to allow any input.
8
Press the upper “OK” key on the touch panel.
9
Press the “AUTO IMAGE” key on the touch panel.
●
Refer to page 2-11 for the AUTO IMAGE function.
10
Enter the desired number of copies and press either of
the COLOUR COPY START (
) key or BLACK COPY
START ( ) key.
I
(139~432)
mm
CANCEL OK
OK
330
SELECT
100%
COPY RATIO
AUTO IMAGE
PLEX
A4
A3
B4
Y-110
148
(139~432)
mm
(100~297)
mm
Y
CANCEL EXTRA SIZE
ENABLE AUTO SIZE DETECTION
OK
OK
READY TO COPY.
X
210
ORIGINAL SIZE PAPER SIZE FOR BYPASS