Sharp AR-5625 Скачать руководство пользователя

Страница: 20 / 159

AR-M256/M257/M258/M316/M317/M318/5625/5631 UNPACKING AND INSTALLATION 5 - 2

D. Other precautions

• If the machine produces smoke or bad smell, stop the operation of

the machine.

• Do not use flammable spray near the machine.

• Do not remove the cabinet of the machine.

• Do not put a receptacle with water in it or metal pieces, which may

drop inside the machine, causing a trouble.

• When it thunders, turn off the power and disconnect the power plug

from the power outlet to prevent against an electric shock or a fire
caused by lighting damage.

• If a piece of metal or water enters the machine, turn off the power

and disconnect the power plug from the power outlet.

• Do not touch the power plug with a wet hand.

• Do not remodel the machine.

• Be careful not to pinch your fingers when closing the front cover or

the side cover and setting the paper feed tray to supply paper or pro-
cess a paper jam.

• When disconnecting the power plug from the power outlet, do not

pull the cord.

• Do not throw toner or the toner cartridge into a fire.

• Keep toner or the toner cartridge away from the children.

• When the exclusive table (option) is used, be sure to use the adjust-

ers (4 pcs.) on the floor.
When it is required to move the machine for rearrangement of the
office, etc., release the adjuster locks and move the machine.

• The fusing section is heated to a high temperature.

When removing a paper jam, be careful not to touch the fusing sec-
tion.

• When the machine is not used for a long time, disconnect the power

plug from the power outlet for safety.

• When transporting the machine, turn off the power and disconnect

the power plug from the power outlet. (Remove the earth wire after
disconnecting the power plug from the power outlet.)

2. Removal of protective material and fixing

screw

1) Remove all tapes, then open the document cover and remove the

protective material of sheet shape.

2) Use a screwdriver to remove the fixing screw.

The fixing screw is required when transporting the machine. Keep
it in the tray. (Refer to the later description.)

3. Removal and storage of fixing pin

1) Lift the knob and gently pull out the tray.

Lock

Adjuster

Release

Fusing section

Содержание AR-5625
































































































































































Результаты поиска

Содержание AR-5625

Отзывы:

Похожие инструкции для AR-5625

Бренды по названию

Популярные бренды

Sharp AR-5625, Руководство по обслуживанию

Результаты поиска

Содержание AR-5625

Отзывы:

Похожие инструкции для AR-5625

Бренды по названию

Популярные бренды