Sharp Actius PC-UM30W, Руководство по эксплуатации

Страница: 85 / 124

5-11
5
9. Type a name of the network in Wireless Network Properties dialog box.
Confirm your computer and other computers are connecting to the same
network.
10. Click OK twice; then, close the Control Panel.
11. Configure the network by setting the name of your computer and workgroup.
To communicate with other wireless enabled computers, set the computer
name and the workgroup name. The computer name should be unique
and the workgroup name should be same as others.
Confirming the Status of the Wireless Connection in Windows 2000
Before performing the following instructions, confirm the devices that you want to
communicate with are enabled for Wireless LAN.
1. Click ( ) icon on the taskbar. Wireless LAN Card Utility for Windows dialog
box opens. A connected network name appears in ESSID of Connected with AP
Information of Card Status tab if available.
•
If you cannot find the ( ) icon, click Start - Programs - SHARP
Wireless LAN Configuration Utility (for members of the
Administrators group).
•
Clicking Rescan button detects another available network.
•
When the WEP security of the wireless network that you want to
access is enabled, make sure to enter the WEP key and the Key
format, the Default Key and the Key characters correctly.
2. Confirm the Link Quality and the Signal Strength on the bottom of the dialog
box.
When the quality of connection is poor, adjust the distance between the
computers and other devices or the access point you are communicating
with and/or the facing direction of the computers.