Sharp Actius PC-UM30W Скачать руководство пользователя | Manualshive

Страница: 1 / 124

background image

i

Notice for Users in the USA

FCC Statement

WARNING - FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the distance between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

A shielded I/F cable and included ferrite core for LAN cable is required to insure
compliance with FCC regulation for Class B computing equipment.

* As an ENERGY STAR

®

Partner, SHARP has determined that this product meets

the ENERGY STAR

®

guidelines for energy efficiency.

Declaration of Conformity

SHARP PERSONAL COMPUTER, PC-UM Series
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions:(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Responsible Party: SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

TEL:

1-800-BE-SHARP

1
2
3
...
»

Содержание Actius PC-UM30W





























































































































Отзывы:

Нет отзывов

Похожие инструкции для Actius PC-UM30W

Бренд: Gateway Страницы: 7

Бренд: IBM Страницы: 2

Бренд: Samsung Страницы: 161

Бренд: Conrad Electronic Страницы: 3

Toughbook CF-50Y8KNUDM

Бренд: Panasonic Страницы: 40

Бренд: Acer Страницы: 69

9410-2829 - Aspire

Бренд: Acer Страницы: 108

5330 2339 - Aspire - Celeron 2 GHz

Бренд: Acer Страницы: 13

5810TZ-4274 - Aspire

Бренд: Acer Страницы: 13

Бренд: Acer Страницы: 34

5738 6969 - Aspire - Core 2 Duo 2.2 GHz

Бренд: Acer Страницы: 13

6493-6495 - TravelMate - Core 2 Duo 2.4 GHz

Бренд: Acer Страницы: 15

6293-6640 - TravelMate

Бренд: Acer Страницы: 14

5735Z PMD T3400

Бренд: Acer Страницы: 6

6593-6325 - TravelMate - Core 2 Duo 2.53 GHz

Бренд: Acer Страницы: 14

Бренд: Acer Страницы: 12

5100-5033 - Aspire - Turion 64 X2 1.6 GHz

Бренд: Acer Страницы: 112

Бренд: Acer Страницы: 137

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды