SharkRF openSPOT3, Руководство пользователя, Страница: 79 / 131

ID 0, or a callsign-based modem mode is used (like D-STAR® and C4FM).
You can also update the Route cross mode calls to ID with the Quick call feature.
If the currently used modem mode is callsign-based (like D-STAR® and C4FM), then you can use DTMF codes
(see below) to update the
Route cross mode calls to ID setting. If the Unlink TG/ref. on cross mode DTMF call
setting is enabled (it is enabled by default), then the openSPOT3 will automatically do a quick group call to DMR
ID 4000 before calling the new ID, to make sure only one talkgroup is linked at a time.
D-STAR® notes
You can update the Route cross mode calls to ID with a D-STAR® radio using two methods:
Set the ID and call type in the D-STAR® radio's URCALL, then start a short call. After the short call, set back
the URCALL to
CQCQCQ
. Examples:
2161005P
- private call to 2161005
216G
- group call to 216
216
- group call to 216 (if there's no
G
character then the call type is set to group call)
DTMF codes: you can start a short private call to an ID by entering * followed by the destination ID in DTMF
code. You can start a short group call to an ID by entering # followed by the destination ID in DTMF code.
Examples:
#3100
- group call to 3100
*4770
- private call to 4770
You can switch servers using the URCALL/your call method. This lets you change to the following server types:
REF/XRX/Gateway: set the URCALL to for example
REF001 C
. Switching to REF/XRF servers or gateways this
way changes the openSPOT3's active connector to the REF/XRF connector .
DCS/XLX: set the URCALL to for example
DCS001 A
. Switching to DCS/XLX servers this way changes the
openSPOT3's active connector to the DCS/XLX connector .
BrandMeister: set the URCALL to
BM
followed by the BrandMeister server ID. Example: starting a call to
destination callsign (URCALL)
BM2162
switches to BrandMeister server 2162 (Hungary). Switching to
BrandMeister servers this way changes the openSPOT3's active connector to the Homebrew/MMDVM
connector .
FCS: set the URCALL to the FCS server and room number. Example: starting a call to destination callsign
(URCALL)
FCS00199
switches to FCS001 room 99. Switching to FCS servers this way changes the
openSPOT3's active connector to the FCS connector .
YSFReflector: set the URCALL to
YS
followed by the YSFReflector server ID. Example: starting a call to
destination callsign (URCALL)
YS89804
switches to YSFReflector 89804 (AmericaLink). Switching to
YSFReflector servers this way changes the openSPOT3's active connector to the YSFReflector connector .
NXDNReflector: set the URCALL to
NX
followed by the NXDNReflector server ID. Example: starting a call to
destination callsign (URCALL)
NX28299
switches to NXDNReflector 28299 (America-Ragchew). Switching to
NXDNReflector servers this way changes the openSPOT3's active connector to the NXDNReflector connector .
C4FM notes
If you use a C4FM radio, make sure it is in digital narrow (DN) mode, otherwise your calls can't be converted and
only silence will be sent to the network.
You can update the Route cross mode calls to ID with a C4FM radio using DTMF codes. You can start a short
private call to an ID by entering the Special command/cross mode private call DTMF code (by default it's *)
followed by the destination ID in DTMF code. You can start a short group call to an ID by entering the Cross mode
group call DTMF code] followed by the destination ID in DTMF code.
Homebrew/MMDVM®
79