SharkRF openSPOT3, Руководство пользователя

Страница: 78 / 131

Homebrew/MMDVM® connector
You can use this connector to connect to a network which supports the Homebrew or the MMDVM® protocol,
like BrandMeister, DMRplus, Phoenix, DMR-MARC, XLX.
The easiest way is to use the Quick setup to connect to these networks.
This connector supports 2 protocols: Homebrew and MMDVM® . Use the Homebrew protocol to connect to
BrandMeister network servers, and the MMDVM® protocol to connect to DMRplus, Phoenix, DMR-MARC or XLX
servers.
The default server password for BrandMeister servers is passw0rd or password, but some servers do not use these
defaults. In this case take a look at the
BrandMeister wiki , or ask the server's admin for the password if the
openSPOT3 won't connect with the default one.
If you can't connect to a BrandMeister server because the authentication has failed , then turn off Hotspot
Security on your BrandMeister SelfCare page, or use the hotspot password you've set there as the server
password.
If you are using a BrandMeister server in Homebrew protocol mode, you can see the list of currently linked static,
dynamic talkgroups and reflectors on the openSPOT3's Status page.
Cross mode usage
The Homebrew/MMDVM® connector is a DMR connector, but it supports D-STAR®, C4FM and NXDN® cross
modes.
In cross modes, you can set the Route cross mode calls to ID to the talkgroup ID you want to talk to (set the call
type to Group call ). If you use a cross mode which is ID-based (like NXDN®), then this ID (and call type) will be
automatically updated based on what ID you call on your radio. This ID will be automatically used if you call the
Homebrew/MMDVM®
78