SharkRF openSPOT3 Скачать руководство пользователя | Manualshive

Страница: 55 / 131

background image

The

Default callsign for cross mode calls

will be used when a received DMR or NXDN call does not have a talker

alias, or the call's ID doesn't have an associated callsign in the database (or the database is not available).

If Advanced mode is enabled, the following settings show up:

If a call is received by the modem to the

Echo callsign

, then the openSPOT3's built-in

local echo service

gets

activated. It will record the call and plays it back after the call is finished.

If the

Force message to D-STAR network in cross mode

is not empty, then the specified message will be sent to

the D-STAR® network if a DMR, C4FM or NXDN call is received from the modem.

If the

Transmit RX confirmation

checkbox is checked, the openSPOT3 will transmit a short call confirmation after

the PTT is released on the D-STAR® radio.

If the

Auto mute DTMF commands

checkbox is checked and a call is ongoing from the modem, and a DTMF

sequence is being entered, then the call to the network will be automatically ended, so others won't be annoyed
by hearing your DTMF tones on the same reflector/gateway.

C4FM/Fusion® settings

The

Default callsign for cross mode calls

will be used when a received DMR or NXDN call does not have a talker

alias, or the call's ID doesn't have an associated callsign in the database (or the database is not available).

If Advanced mode is enabled, the following settings show up:

Allow data calls to network

: if enabled, data calls will be forwarded from the modem to the network. This

is not required for normal operation.

Ignore Wires-X® button commands

: Wires-X® button commands received by the modem will be ignored in

case this settings is enabled.

Do not convert Wires-X® server names to uppercase

: all server names sent to the transceiver are

converted to uppercase by default, and space characters are replaced with dashes. This conversion can be
turned off with this setting. The conversion is done because some radios (like the Yaesu FT70) do not show
lowercase characters on their displays, and space characters prevent the radio from saving the current server
to a category.

Don't send automatic Wires-X® connect messages

: the openSPOT3 automatically sends Wires-X® connect

messages in case it connects or disconnects to/from a server. These automatic messages can be disabled
with this setting.

Hide profiles in Wires-X® "all" reply

: if this setting is enabled, configuration profiles won't be listed on the

first page for a Wires-X® "all" server search.

Auto mute DTMF commands

: if a call is ongoing from the modem, and a DTMF sequence is being entered,

and the first character is a

Special command / cross mode private call

or

Cross mode group call

DTMF

Settings page

55

«
...
53
54
55
56
57
...
»

Содержание openSPOT3




































































































































Отзывы:

Нет отзывов

Похожие инструкции для openSPOT3

Бренд: Fujitsu Страницы: 46

BACnet UTY-VBGX

Бренд: Fujitsu Страницы: 103

Бренд: Fujitsu Страницы: 159

Бренд: Acer Страницы: 113

Бренд: D-Link Страницы: 7

DPG-2000W - AirPlus G Wireless Presentation Gateway

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 37

DSA 5100 - Airspot - Gateway

Бренд: D-Link Страницы: 28

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 50

Бренд: D-Link Страницы: 67

Бренд: D-Link Страницы: 17

Бренд: D-Link Страницы: 13

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 37

Бренд: D-Link Страницы: 42

Бренд: D-Link Страницы: 83

Бренд: D-Link Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды