SharkRF openSPOT3, Руководство пользователя

Страница: 20 / 131

Enabling the GPS receiver
Go to Menu > GPS > GPS Set > GPS Select and select Internal GPS .
Selecting the position data format
Go to Menu > GPS > GPS TX Mode and select D-PRS (DV-A) . This is the easiest method. You can enable the
Course/Speed extension.
Now your radio will transmit location information during your calls if it has a GPS fix and you hold the PTT for at
least 5-10 seconds. The APRS® location comment will be your D-STAR® radio's TX message (
Menu > My Station
> TX Message ).
Advanced settings
If you want to select your own APRS® symbol, SSID and comment for your transceiver then enable Advanced
mode, go to the Connectors page, open the APRS® connector settings, and enable forced SSID/symbol/comment.
You can also set the APRS® symbol and SSID in your transceiver without using forced settings on the web
interface: select the
NMEA(DV-G) GPS TX mode. Enable the RMC and GGA GPS sentences. Other sentences are
ignored by the openSPOT3 so turn them off.
You can set the APRS® symbol for your transceiver by entering it as the first 2 characters of the GPS Message .
You can use the symbol selector on the openSPOT3's web interface at the APRS® connector settings to find out
the character code of a symbol.
You can set an SSID for your transceiver by entering it after the APRS® symbol in the GPS Message.
Setting a symbol and an SSID is optional. You can enter 2 space characters for the APRS® symbol, or nothing for
the SSID, or you can leave the GPS message completely empty if you want.
GPS message examples:
House symbol with no SSID:
/y
Car symbol with SSID 9:
/>9
Default symbol with SSID 12:
..12
(replace the 2 dots with 2 spaces)
Setting up your transceiver
20