SharkRF openSPOT3, Руководство пользователя, Страница: 97 / 131

DAPNET connector
You can use this connector to connect to a network which supports the DAPNET protocol.
The easiest way is to use the Quick setup to connect to these servers.
This connector supports the POCSAG modem protocol which is the protocol used by pagers. You can find more
information about POCSAG and DAPNET
here .
The openSPOT3 acts as a transmitter on DAPNET, so make sure you use your DAPNET transmitter login and auth
key for connecting the openSPOT3. These are not the same as your DAPNET user account. A separate transmitter
registration is needed. See
this page for more information.
This connector can stay active in the background if Stay connected in background is checked, which means you
can use the openSPOT3 the same way as before with other active connector, but it will function also as a
personal DAPNET/POCSAG transmitter. The openSPOT3 will automatically broadcast DAPNET/POCSAG messages
when there's no call coming from the network or modem for POCSAG TX delay seconds (this can be set on the
Settings page, POCSAG settings section ), so ongoing calls won't be interrupted by POCSAG messaging. If the
DAPNET connector is running in the background then you can see it's connection status on the Status page.
DAPNET
97