Shannon HRP/D, Руководство пользователя

Страница: 20 / 53

User’s guide
HRP/D - 19 -
HS
Operation 7
4. Press the round red button[1] to stop the machine
5. Press the green round button[3] to active the pneumatics. The feeding
system will begin working now.
6. If the pusher has to wait between two cycles of pushing plates on the
belt, it can best be done by pausing the pusher beneath the stack of
plates. The system has to be tuned in such a way that if the pusher
comes from underneath the stack of plates, it has to begin pushing
immediately.
7. The feeding system can be fine-tuned un the following ways:
a. If the system stops to fast, increase the cycle number by
increasing the top value in the display.
b. If the reloading time is too long, decrease the second value on
the display.
c. If the pushing time is too long, decrease the third value on the
display.