25
“Check-Sum” detection selection (Under F32-01 setting, only)
F34
●
0
Check-Sum Not Use
1
Check-Sum Use
Under Stream Mode select the way transmit data protocol/frame (basic port)
F35
●
0
Transmit by Protocol
1
Transmit by frame (in case of using specific utility)
Caution : In case of “Transmit by frame” & under 14400bps setting(F31), the speed of
system will be slow.
DATA Transference Mode selection (Under F32-00 setting, only)
F36
●
0
Weighing Data will be transferred continuously
1
Single time data transference, at first steady point, over than Empty range.
2
Single time data transference, first weight steady point over than Empty
range.
3
Data transference, Whenever “Print” key input
DATA Transference Format selection (Under F32-00 setting, only)
F37
●
0
Format 1 (recommended when using external display)
1
Format 2. (Format 1 + ID No.)
2
Format 3 (recommended when connecting to PLC or PC)
3
CAS Format
Print Mode selection (Under F32-02 setting, only)
F38
●
0
Manual Print : Whenever “Print” key input.
1
Auto print (at the first Steady point over “EMPTY” range
or Whenever “Print” key input.)
2
Auto print (Whenever Steady status at over “EMPTY” rage
or Whenever “Print” key input.)
3
Auto print : Whenever finish weigh(under F21-3, 4, 5 setting, only)
■ Print Mode Setting
Weight Unit selection
F41
●
0
Kg
1
g
2
t
Print Format selection
F42
●
0
Continuous Print -
Serial No. and Weight will be printed continuously.
1
Single Print -
Date, Time, S/N, ID No. Weighing Data will be print
SUB/GRAND Total Data Delete selection
F44
●
0
Not deleted (manual Delete mode)
1
Automatically Deleted.-After print out SBU/GRAND Total.
