11
5. SET-UP
5-1. Set up
This is the Menu which can set the all of the functions.
There may be some display differences between real and on the manual.
5-1-1. Start “SET UP” Mode (Pass is Word Not used)
Press
key four times within 2sec
“SET UP” will be displayed, Mode activated
5-1-2. Start “SET UP” Mode (Pass Word Use – Refer F-function 95)
Press
key four times within 2sec
If “P-W” displays, input 4 characters password.
If Password is right, “SETUP” Mode starts.
If Password is wrong,
it is back to weighing display.
If you set password by “F95”. “TEST” mode, you cannot start “SETUP” Mode without
password.
Please don’t forget the pass word.
After starting ”Calibration” mode, and “Test” mode, serial I/F will be closed.
After starting ”Calibration” mode, and “Test” mode, serial I/F will be closed.
PUSH
FOUR
TIMES
PUSH
FOUR
TIMES
