16
5-3. Simulation Calibration Mode(Calibrate without Test weight)
With this “Simulation Calibration Mode” you can make simple calibration without any “TEST weight”
This calibration mode uses “Load cells’ max capacity” and “Max. Output Rate(mV)”, so the weight
adjustment degree might be less than “Test weight Calibration”.
The guaranteed resolution of this “Simulation Calibration” is 1/3,000.
5-3-1.
Simulation Calibration Mode Start
Under “SEtUP” Mode, press
key.
“CALIbr” displays, press
key.
If “S-CAL” displays, press
key to start
Simulation Calibration Mode
