6
│ 2 SeCorr system
●
F8
wireless headphones (optional)
●
AC 200 SK 4
case
The system can be transported and stored in the case. The
batteries for the components
C 200
,
RT 200
and
F8
can be si-
multaneously charged in the case using the AC/DC adapter
L
.
Accessories can be added to the system at any time.
Note:
Information about
F8
wireless headphones can be found in the
relevant operating instructions.
2.2.2
C 200 receiver
The
C 200
receiver receives data from the
RT 200
transmitter.
The receiver calculates the leak position from the run time differ
-
ence between the signals of the two receivers.
The
C 200
receiver is also known as a correlator.
2.2.2.1 Setup
Overviews with the names of all the parts of the receiver can be
found inside the front cover (fig. 1 and fig. 2).
Its symmetrical housing means that it can be operated by both
right-handed and left-handed users with ease.
Touch screen
The receiver features a touch screen. Certain areas of the touch
screen are touch-sensitive. Actions are performed by touching
these areas (buttons).
All of the buttons have a thick, dark grey outline.
Only your finger or a touch pen should be used to operate the
touch screen.
● Always touch the buttons briefly without exerting too much
pressure.
