3 Using the system
│
23
Note:
The quality of the correlation result depends greatly on the con-
figuration of the pipe sections.
● Make sure you configure the pipe sections completely and cor
-
rectly in accordance with the conditions on the ground.
●
Adjust the settings before starting the measurement. Any
changes made after the start of a measurement will mean that
it will not be possible to continue the measurement afterwards.
The main view is open.
1. Tap the
Pipe sections
button. The
Pipe sections
menu will
appear.
Fig. 17:
Pipe sections
menu
Top:
Diagram of pipe sections,
here:
measuring section
with two pipe sections, 2nd pipe section selected
(highlighted blue)
Top right:
Add
button
Centre:
Pipe data from the selected pipe section
2. Set the number of pipe sections (section 3.3.1).
3. Adjust the pipe data for every pipe section (section 3.3.2).
3.3.1
Setting the number of pipe sections
A measuring section consists of:
●
at least one pipe section
● a maximum of five pipe sections
