56
│ 4 Settings
4.3.3
Pipe data (Default)
The default values, which are automatically assigned to each
new pipe section created, are set in the
Pipe data (Default)
view.
SEWERIN recommends: When selecting default settings, choose
typical values that commonly occur in your everyday work. For
example, if you primarily work on cast iron pipes, set the material
to cast iron.
4.3.3.1 Length
Indicates the length of a pipe section.
●
Value range: 0.5 m – 3000 m
●
Decimal places:
1
4.3.3.2 Material
Indicates the material of the pipe in the pipe section.
There is a wide range of materials available for selection.
4.3.3.3 Diameter
Indicates the diameter of the pipe in the pipe section.
●
Value range: 10 mm – 3000 mm
●
Decimal places:
None
4.3.3.4 Sound velocity
The sound velocity is automatically calculated by the device from
the diameter and the pipe material.
The calculated value can be changed. This change is saved tem-
porarily. However, as soon as other settings are selected for the
diameter or the material, the sound velocity is recalculated.
●
Value range: 220 m/s – 2000 m/s
●
Decimal places:
None
4.4
Settings in the Device menu
The settings in the
Device
menu apply to the receiver.
