2
│ 1 Introduction
1.2
Purpose
SeCorr
is a system used for correlation.
The
SeCorr
system can be used for:
●
Detecting leaks in water pipes
Note:
All descriptions in these operating instructions refer to the system
as delivered (factory settings). The operating instructions apply
to the
C 200
receiver with firmware version 2.x and higher. The
manufacturer reserves the right to make changes.
1.3
Intended use
The
SeCorr
system is intended for professional industrial and
commercial use. The appropriate specialist knowledge is re-
quired to operate the system.
Note:
If necessary, learn more about the principles of the technology
before commencing practical work with the system.
The system must only be used for the applications specified in
