3 Using the system
│
27
●
Tap the
Start measurement
button when the general noise
level is suitable. The measurement will start. The
Stop meas-
urement
button will appear.
3.4.1.3 Repeating a measurement
Measurements can be repeated under the following conditions:
●
The measurement has been stopped.
●
The pipe sections have not been changed.
To repeat a measurement, it must be restarted.
1. Tap the
Reset
button. The
Start measurement
button will
appear.
2. Tap the
Start measurement
button when the general noise
level is suitable. The measurement will start. The
Stop meas-
urement
button will appear.
3.4.2
Stopping a measurement
Ongoing measurements can be stopped at any time.
In order to achieve a reliable result, SEWERIN recommends: Not
stopping the measurement until the marker, leak position and
quality of the peak stop changing.
The main view is open. A measurement is ongoing.
●
Tap the
Stop measurement
button. The measurement will
stop. The
Start measurement
button will appear.
Stopped measurements can be saved or continued.
3.4.3
Saving a measurement
Measurements can be saved. Approximately 70 measurements
can be saved.
A message will appear when the memory is full. Measurements
can be deleted from the memory to free up space. For informa-
tion about deleting saved measurements, please refer to sec-
