3 Using the system
│
29
Fig. 18:
Load
menu
Top left:
Filter by date
button
Centre:
List of saved measurements
3. Tap the relevant measurement in the list. The measurement
will immediately appear in the main view.
Searching for saved measurements
Date filters can be set in the list of saved measurements to search
for specific measurements.
The following date filters are available:
●
Year
●
Year and month
The
Load
menu is open.
1. Tap the
Filter by date
button on the top left. The
Filter by
date
menu will appear.
2. Set the values for the search.
− Left field: Year, right field: Month
−
Any
means that no date filter will be set.
−
Only values that have been saved for the data are available
for the search.
Example:
Measurements were saved in 2017 and 2019. No measure-
ments were saved in 2018. The filter criteria available for
selection are: Any, 2017, 2019.
3.
Apply the filters by pressing
Confirm
. The receiver will switch
back to the
Load
menu.
