Installation Instruction
PIUMA MILLENNIUM
7
Automatism assembly
WARNING :
Before proceeding with the installation, remove the cardboard component positioned underneath the
motor body.
Positioning dimensions (rigid pull arm)
The rigid pull arm is used when the automatism is installed on the swing side of the door .
WARNING
:
For a correct positioning, always use the main axis of the door hinges and the operation axis of the
gearmotor as a reference, as shown in Fig.6.
Make certain that the fastening of the holes "A" (Fig. 4 and 5) is particularly
secure.
300
150
600
15÷29
Piuma Millennium
fastening diagram
1 left-hand opening door
Rigid Pull Arm
Standard End Sides
Gearmotor Axis
Hinge axis
Rigid pull arm
Aluminium guide
Fig. 6
The heights of the prepa-
red fastening holes are
shown in Fig. 4 and 5
.
For right-hand opening
doors (anticlockwise direc-
tion), the assembly of the
automatism perfectly mir-
rors the left-hand opening
assembly.
Rigid pull arm
Aluminium guide
Gearmotor Axis
OPENING DIRECTION
Fig. 7
WARNING :
The final tighte-
ning of the screws must be per-
formed only after having checked
that the vertical positioning of the
automatism guarantees a good
parallelism between the hinge
axis and the gearmotor axis. For
this purpose, the rigid pull arm
and relative guide must be instal-
led, check that the pin coupling
the arm to the cylindrical slide is
not strained during operation.
An error in the position of the auto-
matism may, in fact, cause the pin
of the rigid arm to oscillate with
respect to the cylindrical slide to a
degree beyond the allowed tole-
rance, with consequent damage to
one of the automatism parts.
Содержание Puma Millenium
Страница 1: ...Automatic Operator for swinging doors I N S T A L L A T I O N I N S T R U C T I O N...
Страница 2: ...2...
