Sesamo Puma Millenium, Инструкция по установке

Страница: 14 / 28

14
Installation Instruction
PIUMA MILLENNIUM
The battery charge unit (optional) is inserted
in the terminal board
(part. A) observing the
assembly direction as shown in Fig. 21
Electric
Transformer
Battery
Encoder
Gear Motor
Fig. 22
Part. A
Verify the agreement
between the power
motor cable and the
serigraphy indicated in
the electronic board
+
_
Left Side Electronic Board Connections
Fig. 22 summarises terminal connections on the left side of the electronic board:
+ _
Electrical connections
WARNING : All board or peripheral connections on the terminal board must be
performed with the power disconnected to prevent irreparable damage to the electro-
nic equipment.
WARNING : Any repairs or replacements must be performed by professionally
qualified personnel and original spare parts must be used in repairs.
Connectors must be
inserted as shown
Fig. 21
(*)For the connection of the electric lock, use the optional SESAMO wiring. The compatible electric locks can have a
12V or 24V power supply and must have the "anti-repeater” function (permanent release after the electric pulse: the locking
is restored after the door has been opened and closed). For the settings and the selections of the power supply voltage,
see the following instructions for setting the jumpers and dip switches.
Electric Lock (*)