12
Installation Instruction
PIUMA MILLENNIUM
Adjustment of the stopper
RIGID PULL ARM
Insert the lock (Fig.17 part A) inside
the spline according to the indications
provided on page 11.
Open the door to the desired amplitu-
de, then bring the lock in contact with
the cylindrical runner (Fig.17 part B)
and tighten the screw on the lock.
ARTICULATED PUSH ARM
Assemble the optional stop (Fig.18
Part.B) on the articulated arm (Fig.18
Part.A) using the screws supplied
(Fig.18 Part.C).
WARNING: c
heck that when the
door is completely open, the opening
of the arm does not exceed 140°.
If the stop does not come in contact,
turn the shaped plate over and assem-
ble the striker as shown in fig. 18.
Open the door to the desired amplitu-
de and bring the stop in contact with
the arm (part F fig.18) and tighten the
fixing screws tightly.
A
Fig. 17
B
WARNING :
The max. allowed opening angle is 100°. In the absence of the optional SESAMO stops, limit the travel of
the door in any case (MAX 100°) by means of a rubber stop for example (not included in the supply).
Fig. 18
B
A
F
C
MAX 140°
D
E
Содержание Puma Millenium
Страница 1: ...Automatic Operator for swinging doors I N S T A L L A T I O N I N S T R U C T I O N...
Страница 2: ...2...
