Installation Instruction
11
PIUMA MILLENNIUM
Installation of the guide and rigid pull arm
Reach the guide fixing box (Fig.16 part.A) taking off the S924/A cap (Fig.16 Part.B). Make at least 4 holes corresponding to
the “V” shape in the guide profile.
Use these holes to fix the guide to the frame with appropriate screws. Insert the cylindrical runner (Fig.16 part.D), with the
relative shaft, inside the guide and distribute a uniform layer of grease on the sliding area.
Subsequently, once the installation of the rigid arm (Fig.16 part.E) described in a previous section is finished, screw the
threaded shaft, inserted in the cylindrical runner, in the special hole at the extremity of the rigid arm.
Introduce the stop pad (Fig.16 detail F) into the guide to the right or left of the slide according to whether the door hinge
is on the right or left of the same.
Close the guide with the caps (Fig.16 part.G) and screws supplied (Fig.16 part.H).
Fig. 16
A
B
C
D
E
F
G
H
Содержание Puma Millenium
Страница 1: ...Automatic Operator for swinging doors I N S T A L L A T I O N I N S T R U C T I O N...
Страница 2: ...2...
