Sesamo Puma Millenium, Инструкция по установке

Страница: 27 / 28

Installation Instruction
PIUMA MILLENNIUM
27
The MILLENNIUM unit is set to work in inter lock mode through con-
nections to an electronic unit of the same family.
In inter lock mode one door can only open if the other is not moving,
that is, if not in the movement phase.
To inter lock two automatisms proceed as follows (Fig. 31) :
• connect the terminal AUX IN of unit A to the terminal AUX OUT
of unit B
• connect the terminal AUX OUT of unit A to the terminal AUX IN
of unit B
• connect terminal “-“ of the 12Vdc power supply of unit A to the terminal
“-“ of the 12Vdc power supply of unit B.
Use 4 x 0.22 shielded wire for connections and do not connect
the shield.
When open requests come from the both sensors on both doors an
opening priority needs to be set; to do this, set one door as
MASTER and the other as SLAVE.
When simultaneous signals occur, the MASTER door will open.
To select MASTER and SLAVE use the advanced selector.
Fig. 31
Control Unit A
Control Unit B
Inter lock connection and use