SERO AWA-SS-10 Скачать руководство пользователя страница 26

Страница: 26 / 54

Control

Menus

Main Menu INFORMATION

To open the main menu INFORMATION, press the right- or left-hand button once.

select

the

desired

sub-menu

use

the

down

button.

Open the menu by pressing the right-hand button once.

To return to the main menu, press the left-hand button once.

INFORMATION

OPERATION
HEATCURVE
TEMPERATURE
INTEGRAL
OPER

TIME

RESET
MAN

TEST

Sub

menus

Return

Open

next

menu

Sub-Menu OPERATION

This menu is used for the selection of operating mode. The control system allows for five different operating

modes:

•

OPERATION AUTO

Heat pump and auxiliary heater are regulated automatically by the control system. The text

“OPERATION AUTO” will be displayed on the control panel.

•

OPERATION HEAT PUMP
Heat pump (compressor) operation is allowed by the control system.

•

OPERATION ADD.HEAT

The

auxiliary

heater

will/will not

allowed to operate.

This

operating

mode is normally used when a new

installation is being put into service, before the Brine system is ready for use.

•

OPERATION

WARMWATER

The heat pump will only produce warm water; no heat will be distributed to the heating system. The

text”OPERATION WARMWATER “will be displayed on the control panel.

•

OPERATION HEAT PUMP
Heat pump (compressor) operation is

allowed by the control system.

OFF

not

ON/OFF

•

OPERATION

ROOMHEAT

The

heat

pump

only;

will

distributed to the heating system

text

”

OPERATION WARMWATER

“

will be displayed on the control panel.

The

heat

pump will not produce warm water.

OPERATION

AUTO
ROOMHEAT

WARMWATER

HEATPUMP
ADD

HEAT

ON
OFF

DEFROST

Содержание AWA-SS-10























































Результаты поиска

Содержание AWA-SS-10

Отзывы:

Похожие инструкции для AWA-SS-10

Бренды по названию

Популярные бренды

SERO AWA-SS-10, Инструкция по установке и обслуживанию

Результаты поиска

Содержание AWA-SS-10

Отзывы:

Похожие инструкции для AWA-SS-10

Бренды по названию

Популярные бренды