Sequoia LISST-HOLO, Руководство пользователя

Страница: 58 / 73

58 LISST-
HOLO User’s Guide
8 Ethernet Communications
8.1 Router Use
A static IP address is required for access to the LISST-HOLO via a network.
If you are able to simply plug in your LISST-HOLO to your local network, all you have to do is enter the IP address of the LISST-
HOLO (
http://192.168.0.150/ ).
However, the LISST-HOLO
may conflict with the user’s or user’s administrator security settings, thereby preventing direct
connection to the LISST-HOLO via the local network. In that case, a router is required to communicate with the LISST-HOLO.
Connecting to the router via your
network
The LISST-HOLO comes with a Linksys E1000 router that has been programmed to
communicate with the LISST-HOLO.
Plug your computer’s Ethernet port and the LISST-HOLO into any of the numbered ports on
the E1000 router. Turn on the router, then power up the LISST-HOLO and open up a web
browser. Then initiate communication with the LISST-HOLO as described in section.3.2.
Connecting to the router wirelessly
You may also use a wireless connection to communicate with the router. You must still
connect the LISST-HOLO to the router. Then turn the router on and have your computer
search for the SSID, which is
LISST-Holo . When you have connected to the router you need
to enter the WAP PSK (password), which is manyholograms . Then power up the LISST-
HOLO and initiate communication as described in section 3.2.
Updating LISST-HOLO software via
the Internet
The Internet port on the E1000 router can be connected to your network to give the LISST-
HOLO access to the Internet for software updates.
To log on, leave user name blank and enter
admin for the password.
8.2 Changing the IP address of the Linksys E1000 router
It may be necessary for you to change the IP
address of the E1000 router.
You do NOT have to change the IP address of the
router if you are only changing the last element of
the LISST-
HOLO’s IP address (150).
If you are changing any of the first 3 elements of
the LISST-
HOLO’s IP address (192.168.0) you
*MUST* change the IP address of the router to
match:
1. Apply power to the Linksys E1000 router.
2. Connect the Ethernet jack in a computer to
Ethernet port 1 of the router. Light #1 should
come on.
3. Open Internet Explorer and navigate to
192.168.0.1.
4. Leave the user name blank. Enter admin as
password. This will open up the setup page
below.