Sequoia LISST-HOLO, Руководство пользователя

Страница: 19 / 73

LISST-
HOLO User’s Guide
19
The About page shows the FAQ where you can find more information about how to
download, install, and use OpenSeeIt to view the unprocessed holograms.
If you took a hologram without anything in the laser beam, your hologram will typically
look something like this.
Try taking another hologram, but hold a hair or thin piece of string into the laser beam.
You should then see something like the image to the left.
Take another 1-2 holograms with other types of material in the laser beam, e.g. a
screw, or blow some dust through the laser beam when the hologram is captured.
The LISST-HOLO comes with a test chamber that can be installed between the
windows and be filled with water for testing. To install the chamber remove the U-
shaped spacer and press the sliding part into the chamber leaving a small gap. Center
the openings of the chamber on the windows and insert the U-shaped spacer so that
the O-rings seal on the area around the window.
To put the LISST-HOLO to sleep, click the Home button, then click the Sleep button. If
the Sleep button is not present at the Home page, go to the Tools page and put the
instrument to sleep using the Sleep button on the Tools page (see section 6.6).
You can now safely disconnect the power to the LISST-HOLO.
To continue Getting Started with the LISST-HOLO please read Section 4, Hologram
Processing with Holo Batch and Holo Detail, or skip to Section 5, LISST-HOLO Field
Deployment.