Sequoia LISST-HOLO, Руководство пользователя

Страница: 49 / 73

LISST-
HOLO User’s Guide
49
6 Reviewing Instrument Info and Other Settings
6.1 Intro to Other
Settings In addition to the Start and Stop Conditions there are other parameters that can be changed using
the Ethernet connection. This section will discuss some of the additional parameters that can be
accessed from the home page.
6.2 Home page The Home page shows the System Status, Selected Program and Programming Information. In
addition it also shows Start and Stop conditions for the four different sampling programs.
System Status
The System Status shows the available memory on the internal flash drive, input voltage, current
temperature and depth, endcap switch position, and the state of the two digital inputs.
Select program
The Select Program buttons lets the user select which program should control the LISST-HOLO
sampling. Up to 4 programs can be loaded in the LISST-HOLO.
In the example to the left, Program 1 is selected. If another program is to be selected, click the
appropriate radio button and then click the Apply button.
Programming Information The details on the start/stop conditions for the four different programs are reviewed in section 5.2
and will not be repeated here.
6.3 Images page In addition to the External Memory Module the LISST-Holo has an internal flash drive. When the
External Memory Module is not attached the holograms will be stored on the internal drive. The
Images page shows a listing of the holograms saved on the internal drive.